beginner
fabric guide
how to
quilt sizes
quilting

Quilt Size Chart: Standard Quilt Sizes from Baby to King

Before you buy a single yard of fabric, it helps to know how big your quilt should be. This quilt size chart covers the most common sizes, from newborn and crib quilts to lap, twin, queen and king, along with the mattress sizes they're based on, how much backing and binding fabric each size needs, and an easy way to adjust for the look you want.

Standard Quilt Sizes Chart

Quilt sizes aren't fixed rules. Patterns and quilters vary, so think of these as typical starting points.

Quilt size Typical finished size Good for
Newborn / Receiving About 30" x 30" to 36" x 36" Car seats, strollers, tummy time
Baby / Crib About 36" x 36" to 40" x 52" Cribs, strollers, play mats
Throw / Lap About 50" x 65" to 60" x 70" Couches, gifts, reading chairs
Twin About 70" x 90" Kids' beds, dorm rooms
Full / Double About 84" x 90" Guest rooms, teen beds
Queen About 90" x 95" to 90" x 108" The most popular bed size
King About 108" x 108" or larger King and California king beds

Quilt Sizes in Detail

Newborn Quilt Size

A newborn or receiving quilt is usually about 30" x 30" to 36" x 36". It's small enough to tuck around a car seat or stroller and makes a quick, thoughtful baby shower gift. For babies under 12 months, pediatricians advise keeping quilts and blankets out of the crib during sleep, so newborn quilts are best for tummy time, play, photos and decor.

Crib Quilt Size

A crib mattress is 28" x 52", so most crib quilts run about 36" x 52", or about 40" x 52" if you want a little drop. Many baby quilt patterns are also square, around 36" x 36" to 40" x 40".

Lap Quilt Size

A lap or throw quilt is usually about 50" x 65" to 60" x 70". That's big enough to cover one adult on a couch or chair. It's the most popular size to make, and a single layer cake or jelly roll plus a border often gets you there.

Twin Quilt Dimensions

A twin mattress is 38" x 75", and a twin quilt is usually about 70" x 90". That covers the top with about a 15" drop on each side. For a twin XL dorm bed (38" x 80"), plan about 70" x 95".

Full Quilt Size

A full or double mattress is 54" x 75". A full quilt is usually about 84" x 90".

Queen Size Quilt Size

A queen mattress is 60" x 80", and a queen quilt is usually about 90" x 95" to 90" x 108". The longer size leaves room to tuck under the pillows.

King Quilt Size

A king mattress is 76" x 80", and a king quilt is usually 108" x 108" or larger. For a deep mattress, many quilters go to 120" x 108".

How Much Backing and Binding Fabric for Each Quilt Size

Here's how much backing and binding each quilt size needs. The amounts include about 4" of extra backing on every side, and binding assumes 2 1/2" strips.

Quilt size Backing, 108" wide (one piece) Backing, regular 42"-44" wide (pieced) Binding
Newborn (36" x 36") 1 1/4 yards 2 1/2 yards 1/2 yard
Crib (36" x 52") 1 3/4 yards 3 1/2 yards 1/2 yard
Lap / Throw (60" x 70") 2 1/4 yards 4 1/2 yards 1/2 yard
Twin (70" x 90") 2 3/4 yards 5 1/2 yards 3/4 yard
Full (84" x 90") 2 3/4 yards 8 1/4 yards 3/4 yard
Queen (90" x 108") 3 1/4 yards 9 3/4 yards 1 yard
King (108" x 108") Too wide for one piece once you add the extra; piece two widths 9 3/4 yards 1 yard

Need an exact amount like 2 1/4 yards? We can do a custom cut. Email us at info@myfabricvilla.com.

Plan for a little extra. These are the amounts each quilt needs, but it's a good idea to have a little more on hand in case of a cutting mistake, shrinkage from prewashing or a print you want to line up. Leftovers always come in handy for a matching pillow, binding or the next project.

For a newborn or crib quilt, regular-width fabric is fine for the back. From a lap quilt up, 108" wide quilt backing usually means fewer yards and no seams to sew. The quilt top itself depends on your pattern, so check the pattern's fabric requirements, or use our Fabric Yardage Calculator for your exact size. If you send your quilt to a longarm quilter, ask how much extra backing they need, since some prefer 6" or more on every side.

Standard Mattress Sizes

Bed quilts start with the mattress. Here are the standard US mattress dimensions:

  • Crib: 28" x 52"
  • Twin: 38" x 75"
  • Full: 54" x 75"
  • Queen: 60" x 80"
  • King: 76" x 80"
  • California King: 72" x 84"

How to Size a Quilt for Your Own Bed

The easiest way to get a perfect fit is to measure the bed you're making it for, since mattress depth and bed frames vary a lot.

  1. Measure the top of the mattress, width and length.
  2. Decide on the drop, which is how far the quilt hangs over the sides. A short drop of 10 to 12 inches covers the mattress edge. A longer drop of 15 to 18 inches covers a box spring too.
  3. Add the drop to both sides of the width and once to the length. If you want to tuck the quilt under the pillows, add another 10 to 15 inches to the length.
  4. Add a few inches for shrinkage if you plan to wash the finished quilt. Quilting usually draws the top in slightly too.

Example: A queen mattress is 60" x 80". With a 15" drop on each side and at the foot, plus about 10" for a pillow tuck, you'd plan a quilt around 90" x 105".

From Quilt Size to Fabric

For the quilt top, our guide How Much Fabric Do I Need for a Quilt? walks through the math, and our Fabric Yardage Calculator does it for you.

For the back, see How Much Backing Fabric Do I Need? Two customer favorites in 108" wide backing are Morris & Co. Honeysuckle in Aqua and Silhouette Stars Noir.

Quick Ways to Hit Your Size

  • Baby and throw quilts come together fast with precuts. A layer cake or jelly roll is often enough for a lap quilt top. The Tula Pink Untamed layer cake and the Bright Side Roll Up are both easy places to start. Browse our free layer cake and jelly roll pattern guides for ideas.
  • Need it a little bigger? Add a border. Two borders, a narrow one and a wide one, can add 10 to 15 inches in each direction without changing your blocks.
  • Need it smaller? Leave off a row of blocks, or skip the outer border.

Frequently Asked Questions

What is the most common quilt size?
Throw quilts are the most popular to make, since they're quick and useful everywhere. For beds, queen is the most common.

What size is a lap quilt?
Most lap quilts are about 50" x 65" to 60" x 70", big enough to cover one person on a couch.

What size is a crib quilt?
About 36" x 52" to fit a standard 28" x 52" crib mattress, or 40" x 52" with a little drop.

What size is a newborn quilt?
Usually about 30" x 30" to 36" x 36".

What are twin quilt dimensions?
About 70" x 90" for a standard twin bed, or 70" x 95" for a twin XL dorm bed.

How much backing do I need for a queen quilt?
About 3 1/4 yards of 108" wide backing, or about 9 3/4 yards of regular-width fabric pieced together. Need an exact amount? We can do a custom cut. Email us at info@myfabricvilla.com.

Can a queen quilt fit a king bed?
It will cover the top, but it will look short on the sides. If you want it to hang down, plan a king size.

How big is a baby quilt?
Most are between 36" x 36" and 40" x 52". Smaller sizes work well for play mats and stroller blankets.

Ready to start your quilt? Shop precuts, fabric by the yard and wide backing online or at our Richmond, TX store. Orders of $100 or more ship free in the US, and local pickup at our Richmond store is always free.

New to My Fabric Villa? Join our email list and get 10% off your first order.